The outdoorflag "Feather" is a feather or knife shaped flag with a cross foot and a flexible rod made of glass fiber. For outdoors use, the delivery includes a polybag which can be filled with sand or water.
"Feather" is a feather or knife shaped outdoor event flag, which convinces with its exceptional design. The cross-foot and the flexible glass-fiber rod give stability to the flag system. In addition the included polybag, which can be filled with water or sand gives extra stability when exposed to wind.
A polybag, which can be filled with water or sand and gives additional stability, is included.
This product is available in the sizes S, M and L. You can order the flag with an spike base also. The print, base, polybag and a carrying bag are included.
Indoor and Outdoor
The setup is also possible for inexperienced users within a short time without further tools. The poles are inserted one by one in size, then apply the print over it. Tight the printed flag fabric by hook it into the cross-leg with the carabiner.
Set up in
app. 5 minutes
Feather S: app. 64x220x100cm
Feather M: app. 79x295x100cm
Feather L: app. 88x415x100cm
The foldable, silver cross foot has 4 movable segments, the standing size for this is 100x100cm.
Feather S: 64x198cm
Feather M: 79x264cm
Feather L: 88x383cm
4/0 CMYK sublimation print (file resolution max. 150dpi).
The flag fabric is printed on one side. Their motif appears on the back.
110g/m² "Flag Tex" Flag fabric, 100% polyester knitted fabric, B1
To create your data file correctly, you will find a PDF template at the point "Print data".
Place the cross-foot on the intended place. When the flag is used outside, put some weight on the cross-base by using the polybag and fill it with water or sand. Attach the black fuse to the white loop at the bottom of the flag fabric. Now insert the thinnest rod into the next, thicker rod, no force required. Insert the 3rd and thickest rod directly into the cross-leg. Now slide the flag over the assembled rods, until the pole is at the end of the hemstitch. Place the tubing construction with the print on the third rod and pull the flag as far as possible towards the cross-foot with a smooth tension. Attach the carabiner on the base foot.
If the color compatibility is a high priority, please order a proof. This allows you to counteract color variations and customize them in your file.