The "Barracuda" is a premium retractable banner stand in quality, design and functionality. It suits excellently for a constant use.
The bar at the back consists of a folding part, which is extended at the top by a telescopic part. The print has a maximum height of 210cm, but can also be reduced up to 160cm stepless, if required. The slide-in bar makes a quick and easy exchange of the print possible. On the top the print is glued and clamped into the frame. The bottom side is also glued on the frame and pushed in from the side into the cassette.
The black carrying bag ensures a safe transport. The printing of your motif is included in the offer.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
Max. 1 minute
WxHxD for size 80x210cm:
Digital print CMYK, UV stable, 720dpi (file resolution max. 150dpi)
Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
Polyester 290 g/m², grey backside, BlockOut,
scratch resistant, B1 (fire safety class)
The appearance and workmanship of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may be the result. Please note that they won't be seen considering a viewing distance of 50cm.
The rod is a folding rod with an additional telescopic bar. You can change the visible size of your printed motif stepless from 160cm up to 210cm.
Please always store and transport your RollUp "Barracuda" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up some time it will be smooth again.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and looses his adhesive force.
cassette made of silver anodized aluminum with black plastic caps on the sides.
Please create your print data without trim, bleed and crop marks. You will find all information in our data sheet.
good to know
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file, if necessary.