Retractable Bannerdisplay "Classic Premium", the ultimate top seller for quick presentations. Not more than 10 seconds for assembly. Incl. digitalprint and 24h express, with B1, discounts for Agency, perfect for exhibition
The retractable banner stand "Classic Premium" is one of our most popular roll-ups for informative presentations with frequent set-ups. Your motif is printed on PVC material and attached on the top side with a clamp strip and delivered assembled ready-to-use.
The banner display has two revolving feet. For your advertising presentation fix the banner on the rear side with a folding bar. A black padded transport bag is included as well as the printing of your uploaded file after data check.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
Max. 1 minute
Modell 85x200cm (WxHxD): approx. 87x209x31cm
The pole is a 3-part folding rod and not height-adjustable.
Closed size approx. 87x9x9cm
85x200cm, 85x220cm, 100x200cm, 100x220cm, 120x200cm, 120x220cm, 150x200cm, 150x220cm
Digital print CMYK, UV stable, latex, 720x720dpi (file resolution max. 150dpi)
fire protection class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
PVC material 500g/m², UV-resistant, B1 certificated, white backside
An angular up to 3° to the front or back is in the technical range of tolerance. We recommend not to continue motifs for more than one banner.
Please always store and transport your rollup "Classic Premium" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your rollup regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up sometimes it will keep smooth.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
The cassette is made of anodized aluminum with black aluminum caps on the sides and on the base feet.
Please create your print data without trim, bleed and crop marks. You will find all information in our data sheet.
good to know
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and adjust them in your file, if necessary.