Advertising flag "Edge" is a rectangular flag in three different heights. Available with ground base or spike.
The outdoor flag "Edge" is a rectangular beach flag. It is easy to transport and usable for mobile advertising for events or in front of a store or company for an extra eye-catcher.
The square flag has a foldable cross base made of aluminum and a poly bag. This can be filled with sand or water when used outdoors and stabilizes the crossfoot. A spike flag base is also available on request. With both variants the flag can turn in the wind.
The event flag "Edge" is available in the sizes S, M, and L. The offer includes the onesided print acoording to your file on the translucent fabric, the cross base with a poly bag (or optional ground spike) and two carrying bags.
Technical details
Used for
Indoor and outdoor
?
Set up
The set up is also possible for inexperienced users within a short time without tools. The poles are inserted one by one in size, then apply the print over it. Tight the printed flag fabric by hook it into the cross-foot with the carbin.
Set up in
Approx. 5 minutes
Standing size
Flag size print (WxH):
Edge S: approx. 86x230cm
Edge M: approx. 86x280cm
Edge L: approx. 92x345cm
Final size (WxH):
Edge S: approx. 72x305cm
Edge M: approx. 82x365cm
Edge L: approx. 92x400cm
The foldable cross foot has 4 movable segments, the standing size is 100x100cm.
Printing measurements
For details please see our artwork guideline.
To create your data file correctly, you will find templates (PDF, AI, EPS) under "Template".
Print quality
4/0 CMYK sublimation print (file resolution max. 150dpi).
The flag fabric is printed on one side. The motif appears on the back.
?
B1 certificate
B1 is a fire safety classification certificate and describes the fire retardancy of the material, which is mandatory for many events and trade shows.
Print media
110g/m² "Flag Tex" Flag fabric, 100% polyester knitted fabric, B1 (fire safety class)
good to know
Mounting
Place the cross-foot on the intended place. When the flag is used outside, put some weight on the cross-base by using the water or sand filled polybag. Attach the black securing rubber to the white loop at the bottom of the flag fabric. Now insert the thinnest rod gently into the next thicker rod. Insert the 3rd and thickest rod directly into the cross-leg. Now slide the flag over the assembled rods until the pole uo to the end of the hemstitch. Place the tubing construction with the print on the third rod and pull the flag as far as possible towards the cross-foot with smooth tension. Attach the carbine on the base foot.
Colour deviation
If the color compatibility is a high priority, please order a proof. This allows you to counteract color variations and customize them in your file, if necessary.