Beachflag "Crest" has an elegant, slightly bent shape. It is available in 3 sizes.
The outdoor flag "Crest" impresses with its elegant, slightly curved shape. Included in the scope of supply is the foldable cross foot with a poly bag and the custom printed flag banner, which can be filled with sand or water and provides optimal support for the outdoor use of the beachflag. On request the flag system can also be ordered with a ground spike.
The glass fiber tube connector system ensures optimum mobility and flexibility in outdoor wind conditions.
The flag is available in the sizes S, M or L, onesided and translucent printed with your custom motif, cross foot and poly bag or spike and bag.
Technical details
Used for
Indoor and outdoor
?
Set up
The set up is also possible for inexperienced users within a short time without tools. The poles are inserted one by one in size, then apply the print over it. Tight the printed flag fabric by hook it into the cross-foot with the carbin.
Set up in
Approx. 5 minutes
?
Size
The foldable cross foot has 4 movable segments, the standing size is 100x100cm.
Standing size
Flag size print (WxH):
Crest S: approx. 60x205cm
Crest M: approx. 65x265cm
Crest L: approx. 85x345cm
Crest XL: approx. 90x395cm
Final size (WxH):
Crest S: approx. 60x240cm
Crest M: approx. 65x300cm
Crest L: approx. 85x400cm
Crest XL: approx. 90x500cm
The foldable cross foot has 4 movable segments, the standing size is 100x100cm.
Manufacturing
With hemstitch as described in our PDF template.
Printing measurements
For details please see our
artwork guideline.
You will find templates (PDF, AI, EPS) under "Template" to create your printing data.
Print quality
CMYK sublimation print (file resolution max. 150dpi)
?
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
Print media
110g/m² "Flag Tex" Flag fabric, 100% polyester knitted fabric, B1 (fire safety class)
good to know
Mounting
Place the cross-foot on the intended place. When the flag is used outside, put some weight on the cross-base by using the water or sand filled polybag. Attach the black securing rubber to the white loop at the bottom of the flag fabric. Now insert the thinnest rod gently into the next thicker rod. Insert the 3rd and thickest rod directly into the cross-leg. Now slide the flag over the assembled rods until the pole uo to the end of the hemstitch. Place the tubing construction with the print on the third rod and pull the flag as far as possible towards the cross-foot with smooth tension. Attach the carbine on the base foot.
Colour deviation
If the color compatibility is a high priority, please order a proof. This allows you to counteract color variations and customize them in your file, if necessary.