Weatherproof banners printed on 310g mesh material. Suitable for places with a lot of wind or high buildings.
The meshed banner material is ideal for windy environments becuase of its perforated structure. Eyelets enable different kinds of installation and easy mounting. You can select your custom manufacturing on the product page.
This material is B1 certified so you can use it for many indoor events like concerts, trade shows and other indoor events.
Your motif will be printed on weatherproof mesh banner according to your printing file after free data check.
You can find fitting mesh banners for site fence or scaffoldings via the links or in our online shop.
Indoor and outdoor
Special manufacturing of eyelets
If you wish for a special manufacturing of eyelets, please create the eyelet markings in your printing file with a 0.5cm diameter in magenta 100% at the positions you wish eyelets.
For hemstitch please send us a seperate sketch.
Please see our data sheet for detailed information.
According to your selection.
To create your printing motif or for special / custom manufacturing please see our artwork guideline
Please note: If you opt for a different manufacturing the standard manufacturing expires
"dpi" means Dots Per Inch and describes for each product the resolution your print data should have for an ideal result
for example: a value of 600x600 dpi concerns to the vertical and horizontal resolution of the print and specifies the quality, which is mostly higher than the data resolution.
Digital print CMYK, Eco Solvent, 300x300dpi (file resolution max. 150dpi)
B1 is a fire safety classification certificate and describes a fire retardant material, which is obligatory for many events and trade shows.
310g/m², Mesh / Vinyl banner material, scratch resistant, opaque, B1
Packaging and storage
All sizes above 2.2m of the shorter side will be folded. All smaller dimensions will be rolled.
10x2.20m - the banner will be delivered rolled
10x2.21m - the banner will be delivered folded
We recommend to store and transport the banner rolled (if possible). Folded transportation and storage can result in creases and wrinkles. This can be minimized only by a smooth and tight tension on all sides by time.
Depends on intensity of solar radiation and place of installation: in average 2 years, in max. 4 years. In extreme cases, e.g. installation on a flat roof, 1 year.
good to know
The minimum size per piece is 0.5m². Even if the selection is possible in the shop, please contact us in advance for smaller sizes.
We recommend to mount the banner with rubber hooks or expander rope (available as accessories). Cable ties or regular ropes are not recommended due to lack of elasticity - eyelets may tear out.