The retractable banner stand ?Slim? in shapely design and combined functionality attracts your advertising motif on events, exhibitions and presentations. Your motif is in focus by the flat front cassette and will be stored into the wave-shaped case.
The retractable banner stand ?Slim? in shapely design and combined functionality attracts your advertising motif on events, exhibitions and presentations. Your motif is in focus by the flat front cassette and will be stored into the wave-shaped case. Screw feet can balance slightly uneven ground, if necessary. The two-parts pole has an additional telescopic bar to costumly adjust the print up to a minimum motif height of 155cm.
The 200cm high retractable banner stand is available in widths from 80cm to a square motif format of 200cm. Our banner display offer includes printing according to your data and a padded carry bag.
Technical details
Standing size
Modell 85x200cm (WxHxD): approx. 88,5x208x21cm
The pole is a 2-part folding rod and not height-adjustable.
Closed size approx. 23x93x12cm
Printing measurements
80x200cm
85x200cm
100x200cm
120x200cm
150x200cm
200x200cm
Print quality
Latexprint CMYK, UV stable, 600dpi (file resolution max. 150dpi)
Print media
Print on rollup film:
Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
Print on textile:
Polyester 290 g/m², grey backside, opaque, BlockOut,
scratch resistant, B1 certified (fire safety class)
The appearance and workmanship of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may be the result. Please note that they won't be seen considering a viewing distance of 50cm.
Print on PVC:
PVC material 500g/m², UV-resistant, white backside, B1 certified
Special features
IMPORTANT:
A 3° angle of inclination to the front or back is in the technical range of tolerance. We recommend not to create coherent motifs for more than one banner.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
Material
The cassette is made of anodized aluminum with black aluminum caps on the sides and on the base feet.
good to know
Cartridge feed
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
Maintenance
The print surface can be cleaned detergent-free with a soft cloth and water.
Colour deviation
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and adjust them in your file.