Textile banner in every size and manufactoring. Sublimation print on textile banner on a B1 certificate Material.
The fabric banner "DekoTex" is a light material for advertising and placing information in indoor areas.
It is available in custom size with custom print according to your printing file. Print on textile banner. You can also select from different manufacturing options on this product page.
The material "Deko Tex" is B1 certified (fire protection class), so it is suitable for the use on events, concerts and as stage and exhibition stand decoration and many more.
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
According to your selection.
To create your printing motif or for special / custom manufacturing please see our artwork guideline at tab print data.
Please note: If you opt for a different manufacturing the standard manufacturing expires.
Data resolution and print resolution
"dpi" means Dots Per Inch and describes for each product the resolution your print data should have for an ideal result
for example: a value of 600x600 dpi concerns to the vertical and horizontal resolution of the print and specifies the quality, which is mostly higher than the data resolution.
4/0 CMYK UV or Latexink, 600dpi, file resolution max. 150dpi
B1 is a fire safety classification certificate and describes a fire retardant material, which is obligatory for many events and trade shows.
205g/m² fabric banner, B1 certified
Important: Due to the fabric, deviations of up to 1% can occur in the final format.
Packaging and storage
All sizes above 110cm will be folded. All smaller dimensions will be rolled.
500x110cm - the banner will be delivered rolled
500x111cm - the banner will be delivered folded
We recommend to store and transport the banner rolled (if possible). Folded transportation and storage can result in creases and wrinkles. This can be minimized only by tightening at all sides by time.
Depends on intensity of solar radiation and place of installation: in average 2 years, in max. 4 years. In extreme cases, e.g. installation on a flat roof, 1 year.
good to know
The minimum size per piece is 0.5m². Even if the selection is possible in the shop, please contact us in advance for smaller sizes.
We recommend to mount the banner with rubber hooks or expander rope (available as accessories). Cable ties or regular ropes are not recommended due to lack of elasticity - eyelets may tear out.
If color accuracy is of high priority, we recommend a proof / preprint. The proof will be printed in DIN A3 on the original material. This allows you to counteract color variations and adjust them in your file, if necessary.