Beachflag "Feather" is a feather or knife shaped flag with a cross foot and a flexible rod made of glass fiber.
"Feather" is a feather or knife shaped outdoor event flag, which convinces with its exceptional design at outdoor events or advertisment in front of stores and companies.
The cross-foot and the flexible glass-fiber rod give stability to the flag system. In addition the included polybag which can be filled with water or sand give the flag extra stability when exposed to wind.
This product is available in the sizes S, M and L. You can order the flag with a spike base, if required. The onesided print on the translucent fabric, base, polybag and a carrying bag are included.
Indoor and outdoor
The set up is also possible for inexperienced users within a short time without further tools. The poles are inserted one by one in size, then apply the print over it. Tight the printed flag fabric by hook it into the cross-foot with the carbine.
Set up in
Approx. 5 minutes
Feather S: Approx. 64x220x100cm
Feather M: Approx. 79x295x100cm
Feather L: Approx. 88x415x100cm
The foldable, silver cross foot has 4 movable segments, the standing size is 100x100cm.
For details please see our fact sheet.
Data resolution and print resolution
"dpi" means Dots Per Inch and describes for each product the resolution your print data should have for an ideal result
for example: a value of 600x600 dpi concerns to the vertical and horizontal resolution of the print and specifies the quality, which is mostly higher than the data resolution.
4/0 CMYK sublimation print (file resolution max. 150dpi).
The flag fabric is printed on one side. The motif appears on the back.
B1 is a fire safety classification certificate and describes the fire retardancy of the material, which is mandatory for many events and trade shows. Please ask the organiser in advance.
110g/m² "Flag Tex" Flag fabric, 100% polyester knitted fabric, B1(fire safety class)
To create your printing file correctly, you can find a PDF template under point "Print data".
good to know
Place the cross-foot on the intended place. When the flag is used outside, put some weight on the cross-base by using the water or sand filled polybag. Attach the black securing rubber to the white loop at the bottom of the flag fabric. Now insert the thinnest rod gently into the next thicker rod. Insert the 3rd and thickest rod directly into the cross-leg. Now slide the flag over the assembled rods until the pole uo to the end of the hemstitch. Place the tubing construction with the print on the third rod and pull the flag as far as possible towards the cross-foot with smooth tension. Attach the carbine on the base foot.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file.