The "Flag Tex" is a tear resistant outdoor flag made of 100% Polyester. It's weatherproof which makes it useful for indoor and outdoor advertising.
The "FlagTex" banner is a tear resistant flag produced of 100% polyester. Made of weatherproof material it is ideal for advertising with a guaranteed outdoor durability of 3 months.
You can mount the fabric banner almost everywhere. Eyelets make it very easy, but you can also chose a custom manufacturing on this product page.
The fire protection class (B1) allows an almost unlimited indoor and outdoor use, e.g. as banners at events, concerts and trade shows or for shop window and stage decoration.
Outdoor and indoor
Special manufacturing of eyelets
If you wish for a special manufacturing of eyelets, please create the eyelet markings in your printing file with a 0.5cm diameter in magenta 100% at the positions you wish eyelets.
For hemstitch please send us a seperate sketch.
Please see our data sheet for detailed information.
According to your selection.
To create your printing motif or for special / custom manufacturing please see our artwork guideline
Please note: If you opt for a different manufacturing the standard manufacturing expires
"dpi" means Dots Per Inch and describes for each product the resolution your print data should have for an ideal result
for example: a value of 600x600 dpi concerns to the vertical and horizontal resolution of the print and specifies the quality, which is mostly higher than the data resolution.
4/0 CMYK Sublimation print (data resolution max. 150dpi)
B1 is a fire safety classification certificate and describes a fire retardant material, which is obligatory for many events and trade shows.
100% polyester fabric 110g/m², B1 certified
Please note: the size of the material may change by processing and use. This may lead in the production up to 2% dimensional change, so we can not guarantee an exact measure. The influence of the weather and UV radiation at place of installation may affect the format and colors, too.
Good water resistance
good to know
The minimum size per piece is 0.5m². Even if the selection is possible in the shop, please contact us beforehand for smaller sizes.
If color accuracy is of high priority, we recommend a proof / preprint. The proof will be printed in DIN A3 on the original material. This allows you to counteract color variations and adjust them in your file, if necessary.