The Rollup "Budget" is perfect for short-term advertising and small budget.
Quick set up without tools and easy handling make it useful for every kind of presentation. A safe transport is guaranteed by rolling the print into the aluminum base foot.
A rear folding rod fixes the print produced according to your uploaded file. The system is stabilized by a central foot, which is visible on the front and back. Included is a black unpadded carrying bag.
For advertising uses that require frequent assembly and disassembly or that are planned for longer term use we recommend our RollUp "Classic Premium".
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and in our data sheet.
Set up in
Max. 1 minute
WxHxD approx. 87x209x31cm
Closed size WXHXD approx. 87x9x10cm
The rod is a 3-part folding rod and not height-adjustable.
Latexprint, UV stable, 600x600dpi (file resolution max. 150dpi).
fire protection class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
Your motif on PVC banner material 510g/m² (opaque, scratch resistant), with white backside, B1 certified (fire safety).
Please always store and transport your RollUp "Budget" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up some time it will be smooth again.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
The cassette is made of anodized aluminum with black plastic caps on the sides and on the base foot.
good to know
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If color accuracy is of high priority, we recommend a proof / preprint. The proof we will print on an 1:1 cutout in size DIN A3 on the original material. This allows you to counteract color variations and adjust them in your file, if necessary.