Roll-Up "LUX", one-sided. High-end product with variable height. Made of silver anodised aluminum. Stylish design.
The "Lux" is a luxury retractable banner system. The printed banner is clamped on the top and on the bottom, to allow an quick and easy exchange of the banner if required. The folding bar has an integrated telescopic rod to adjust the height.
At the bottom of the cassette there are adjusting screws, to compensate, e.g. oblique ground or small unevenness to obtain a straight presentation surface.
The RollUp is delivered in a padded black carrying bag.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
max. 1 minute
WxHxD at 56x225 about 61x234x25cm
The rod is a folding rod with an integrated telescopic rod.
The smallest possible visual dimension of the banner is thus approx. 200cm and can be adjusted continuously to 225cm.
Closed dimensions approx. 61x9x25cm
56x225cm, 83x225cm, 96x225cm, 116x225cm
Digital print CMYK, UV stable, 720dpi (file resolution max. 150 dpi)
without B1: 215µ/m² polypropylene (opaque), grey backside, with matt protective laminate (scratch resistant)
with B1: Polyester 290 g/m², grey backside, BlockOut,
scratch resistant, B1 (fire protection)
Please always store and transport your RollUp "Lux" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up some time it will be smooth again.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and looses his adhesive force.
The cassette is made of anodized aluminum with silver caps on the sides.
Please create your print data without trim, bleed and crop marks. You will find all information in our data sheet.
Be careful with the digital print while rolling down. The digital print should not rub against the side caps. Otherwise the print could be damaged.
Wipe the print surface with a soft cloth and water, please do not use detergents.
If the color compatibility is a high priority, please order a proof. This allows you to counteract color variations and customize them in your file.