Fabric banner with grommets, digital and printing according to your file on Dekotex., light, dirt-repellent, B1, also express available
Textile banner in fixed sizes to select with custom print according to your data. The digital printing will be done on "DekoTex". The B1 (fire protection class) certification of the material allows the use at many indoor events and concerts, but also outdoors.
As standard the printed fabric banner will be manufactured with eyelets, so you can use it immediately for your advertising or for information.
Custom formats with custom manufacturing you can find as Fabric banner "DekoTex".
According to your selection.
To create your printing motif or for special / custom manufacturing please see our artwork guideline
Please note: If you opt for a different manufacturing the standard manufacturing expires
"dpi" means Dots Per Inch and describes for each product the resolution your print data should have for an ideal result
for example: a value of 600x600 dpi concerns to the vertical and horizontal resolution of the print and specifies the quality, which is mostly higher than the data resolution.
4/0 CMYK UV or Latexink, 600dpi, file resolution max. 150dpi
B1 is a fire safety classification certificate and describes the fire retardancy of the material, which is mandatory for many events and trade shows.
205g/m² fabric banner, B1 certified
Important: Due to the fabric, deviations of up to 1% can occur in the final format.
Packaging and storage
All sizes above 1.5m will be folded. All smaller dimensions will be rolled.
4x1.5m - the banner will be delivered rolled
4x2m - the banner will be delivered folded
We recommend to store and transport the banner rolled (if possible). Folded transportation and storage can result in creases and wrinkles. This can be minimized only by tightening at all sides by time.
Depends on intensity of solar radiation and place of installation: in average 2 years, in max. 4 years. In extreme cases, e.g. installation on a flat roof, 1 year.
good to know
We recommend to mount the banner with rubber hooks or expander rope (available as accessories). Cable ties or regular ropes are not recommended due to lack of elasticity - eyelets may tear out.
If color accuracy is of high priority, we recommend a proof / preprint. The proof will be printed in DIN A3 on the original material. This allows you to counteract color variations and adjust them in your file, if necessary.