Beach flag "Square" is a straight, vertical flag. Cross base, ground spike, base plate or water tank selectable. Print according to your file.
The outdoor flag "Square" is a rectangular beach flag. It is easy to transport and usable for mobile advertising for events or in front of a store or company for an extra eye-catcher.
The square flag is offered with three bases to choose from. With all variants the flag can turn in the wind.
The event flag "Square" is available in the sizes S, M, and L. The offer includes the onesided print acoording to your file on the translucent fabric, a base and two carrying bags.
The set up is also possible for inexperienced users within a short time without tools. The poles are inserted one by one in size, then apply the print over it. Tight the printed flag fabric by hook it into the cross-foot with the carbin.
Set up in
Approx. 5 minutes
Flag size print (WxH):
Square S: approx. 60x155cm
Square M: approx. 85x265cm
Square L: approx. 85x375cm
Final size (WxH) without base:
Square S: approx. 60x229cm
Square M: approx. 84x336cm
Square L: approx. 84x444cm
Cross foot: 82,5x20,5x67cm
Water tank: 48x48x39cm | 21 litre
Ground spike 5x60,5x4cm
Bottom plate 55x20x55cm | 6 kg (12 kg for XL-flag)
For details please see our artwork guideline.
To create your data file correctly, you will find a template under tab "Template".
4/0 CMYK sublimation print (file resolution max. 150dpi).
The flag fabric is printed on one side. The motif appears on the back.
B1 is a fire safety classification certificate and describes the fire retardancy of the material, which is mandatory for many events and trade shows.
110g/m² "Flag Tex" Flag fabric, 100% polyester knitted fabric, B1 (fire safety class)
good to know
Place the cross-foot on the intended place. When the flag is used outside, put some weight on the cross-base by using the water or sand filled polybag. Attach the black securing rubber to the white loop at the bottom of the flag fabric. Now insert the thinnest rod gently into the next thicker rod. Insert the 3rd and thickest rod directly into the cross-leg. Now slide the flag over the assembled rods until the pole uo to the end of the hemstitch. Place the tubing construction with the print on the third rod and pull the flag as far as possible towards the cross-foot with smooth tension. Attach the carbine on the base foot.
If the color compatibility is a high priority, please order a proof. This allows you to counteract color variations and customize them in your file, if necessary.