Beachflag "Quill" is a drop shaped event flag. The perfect eyecatcher for events and the point of sale.
The classic Beachflag "Quill" is a drop-shaped flag with a black pipe-plug system. The offer includes a silver, foldable aluminum cross base and a polybag, which can be filled with sand or water. A spike flag base is also available on request. In both variants the flag can move in the wind.
The Outdoor Flag is available in sizes S, M or L. The tubing construction and the cross leg are delivered with a transport bag.
Indoor and outdoor
The set up is also possible for inexperienced users within a short time without tools. The poles are inserted one by one in size, then apply the print over it. Tight the printed flag fabric by hook it into the cross-foot with the carbin.
Set up in
Approx. 5 minutes
Quill S: Approx. 76x190x100cm
Quill M: Approx. 100x236x100cm
Quill L: Approx. 113x317x100cm
The foldable cross foot has 4 movable segments, the standing size is 100x100cm.
With hemstitch as described in our PDF template.
For details please see our fact sheet.
4/0 CMYK sublimation print (file resolution max. 150dpi).
The flag fabric is printed on one side. Your motif is visible mirror inverted on the backside.
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
110g/m² "Flag Tex" Flag fabric, 100% polyester knitted fabric, B1 (fire safety class)
To create your printing file correctly, you can find a PDF template under point "Print data".
good to know
Place the cross-foot on the intended place. When the flag is used outside, put some weight on the cross-base by using the water or sand filled polybag. Attach the black securing rubber to the white loop at the bottom of the flag fabric. Now insert the thinnest rod gently into the next thicker rod. Insert the 3rd and thickest rod directly into the cross-leg. Now slide the flag over the assembled rods until the pole uo to the end of the hemstitch. Place the tubing construction with the print on the third rod and pull the flag as far as possible towards the cross-foot with smooth tension. Attach the carbine on the base foot.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file.