Foil plot, individually cut out letters and graphics with transfer foil for many applications, for outside and inside.
Foil plot, individually cut out letters and graphics for many applications. Supplied on backing sheet as one unit per colour. Very well suited for short and medium-term inscriptions, markings and decorations indoors and outdoors. Can be kept almost indefinitely indoors.
Please order a separate position for each color in your graphic, with the corresponding dimensions.
Technical details
Application
Indoors and outdoors on flat surfaces.
No recommendation for gluing on natural stones (marble, granite, etc.) possible discolouration.
Assembly
The plot (cut) is based on the file you provide (technical implementation must be guaranteed).
Print dimensions
Max. cutting width: 1.45m (short side)
Max. cutting length: 50 m (long side)
From a width of the short side of 1.45m and a maximum length of 30m, rectangular and foils with cut contours are divided. Up to this value they are each produced in one piece.
Print quality
No print, processing with cutting plotter
Packaging, storage
Store dry, flat or rolled up, 2 years
Material
Orafol 651, special PVC film with a glossy surface.
Covering material: Silicone cardboard coated on one side, 137g/m².
Durability
With professional processing
black and white 5 years, colored 4 years, brilliant blue 3 years
Adhesive
Solvent polyacrylate, permanent
Good to know
Assembly
On smooth, level surfaces.
We recommend (not binding) that a partial foil covering up to a maximum of 50% of the glass surface be applied by specialist personnel. Full gluing on laminated glass must not be carried out, as this can lead to glass breakage. Please contact us if you have any questions.
We pass on the important information from the manufacturer. This is as follows: "Caution: The surface to be glued must be free of dust, grease or other contaminants that could impair the adhesive strength of the material. New paintwork must be dry or fully cured for at least three weeks. Application tests with the intended paints. Furthermore, the processing instructions issued by ORAFOL must be observed. The basis for the information is our knowledge and practical experience. Due to the variety of possible influences during processing and use, we recommend that you conduct your own tests on our products for special applications A legally binding assurance of certain properties cannot be derived from our information."
Maintenance
The foil plot can be wiped off with a slightly damp cloth without aggressive cleaning agents.