Categories Large Format Prints - Stickers Luminescence sticker with digitalprint


New

Luminescence sticker with digitalprint

Product no.: AFKLR-LEUO-S

Additional services list

Please enter your format

Please enter only 2 decimal places.

This service is mandatory. You have to order it at least 1 times.
from 59.00 €
plus 19% VAT 
and shipping

Aufkleber an dieser Markierung getrennt.

 

There are no more services to add to the project.
Price per unit 59.00 €
plus 19% VAT 
and shipping
At the moment there is no price available. Please add you custom measures or close the editing mode.
Selected services
No Services were booked yet.
Total:0.00 €

available in 4 days

Product contents

1 package contains:
1x lightsticker "Luminescent"
with CMYK digital printing
UV-stable and scratch-resistant
The pale yellow cadmium free foil is activated through UV or artifical light and glows after darkening or turning off the light source.

The pale yellow cadmium free foil "Luminescence" is activated through UV or artifical light and glows after darkening or turning off the light source. Using this ability the afterglow decal is perfect for marking escape routes, for decoration, for events or for art projects indoors and outdoors alike.

Print your motif on luminescent sticker material and make it glow again and again, the luminescence won't suffer. Depending on the intensity of the light source and the duration of the illumination, the lighting time of the sticker may be 1-4 hours. This glow in the dark foil doesn't contain radioactive substances.

Kiss cut is available on request (fee might be added).



Technical details

Used for
Indoor
marking escape routes, showing directions, warning signs, decoration, events
Manufacturing
We will cut to the ordered size.
Printing measurements
max. printing height: 1,4m (shortest side)
max. printing width: 30m (longest side)

The maximum printing width for a rectangular motif and stickers with a cut contour is 1,4m. Up to these values the stickers are produced in one piece. All larger dimensions will be divided according to our data sheet.
Print quality
digital print, CMYK latex (scratch resistant), 600x600dpi, file resolution max. 150dpi
Special features
Please note that only the bright and unprinted areas of the foil glow in the dark. Therefore do not choose your motif too dark.

Depending on the intensity of the light source and the duration of the illumination, the lighting time of the sticker may be 1-4 hours.
Bleed
3mm on all sides

Please note:
If you want to use the sticker for a sign board please add 5mm around the final size, without crop marks. Please send us an information to auftrag@werbecenter-berlin.de.
Durability
Indoor: up to five years (depends on intensity of solar radiation and place of installation), in average four years
Adhesive
permanent adhesive, solvent-polyacrylate
Grammage
230g/m² (without protective paper and adhesive)


good to know

Kiss cut / die cut
Contour cut is possible, please request charge (depending on quantity) in advance.
Minimum size
The minimum size per piece is 1m². Even if the selection is possible in the shop, please contact us in advance for smaller sizes.
Mounting
The adhesive foil should be applied by experts. We recommend only a partial application up to max. 50% of the glass surface. When the sticker foil is applied completly on a glass pane you cause a risk of fracture! If you have any questions do not hesitate to call us.
Maintenance
Please avoid the contact with detergents. For a gentle cleaning please wipe the print surface with a soft damp cloth.
Sheet transition
If your motif needs to be seperated, we will produce the sheets with 5mm overlap.
Colour deviation
Especially when the color compatibility is a high priority, please order a proof. This allows you to place different color variations and customize them in your file.
Oversized order
IMPORTANT
If you wish a division at a particular position, please create the data in seperate segments with 5mm overlap at the cutting position and additional 3mm bleed at all sides.

If we do not have any other information, the sticker will be divided by us in optimal separation automatic. It will be delivered in individual parts with standardly 5mm overlap.

Files with contour cut that exceeds the maximum width must already be divided by you and created with bleed and overlap.

Shipping costs and weight

Weight per unit: 0.25 kg
Shipping costs: click here

Accessories

Weight per unit: 0.1 kg
15.00 € *
Delivery weight: 0.1 kg
*
plus 19% VAT 
and shipping
Weight per unit: 0.1 kg
6.50 € *
Delivery weight: 0.1 kg
*
plus 19% VAT 
and shipping
Weight per unit: 0.1 kg
4.50 € *
Delivery weight: 0.1 kg
*
plus 19% VAT 
and shipping
Browse these categories as well: - Stickers, Large Format Prints, - Luminescence sticker, Sticker