The rectractable bannerdisplay "double" is for presenting two advertising messages. 24h Express, free filecheck. Prints are bonded on the upper bar and are tightened by a clip inside the foot
The "Double" is an ideal banner stand system to present two advertising messages at the same time. Or you can use one motif for both sides and double your media presence, e.g. on events with public from more than one direction. The retractable banner stand doubles the advertising space and range without requiring more space.
The prints will be printed according to your file, then clamped on the upper bar and tightened by a spring mechanism inside the aluminum base. The retractable banner stand "Double" will be delivered with a padded bag for a safe transport when the prints are rolled into the base.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
WxHxD for size 85x200 approx. 87x210x60cm
The rod is a 3-part folding rod and not height-adjustable.
Closed size app. 87x16x10cm
Two pieces each:
Digital print CMYK, UV stable, 720dpi (file resolution max. 150dpi)
Without B1: Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
With B1: Polyester 290g/m² grey backside, BlockOut, scratch resistant, B1 (fire protection)
The appearance and structure of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may result. Please note that they won't be seen considering a viewing distance of 50cm.
Please always store and transport your RollUp "Double" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up some time it will be smooth again.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
The cassette is made of anodized aluminum with silver aluminum caps on the sides. The rotable base foot in the middle is made of metal.
Please create your print data without trim, bleed and crop marks. You will find all information in our data sheet.
good to know
To avoid damages of the print please pull the prints straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file.