Retractable Bannerdisplay "Single Premium" with digitalprint is a topseller when it comes to quick assembly and safe transport
The high-quality retractable banner stand "Single Premium" has an elgant silver cassette. It has a rotable metal base which provides a firm foothold. The rollup will be delivered in a padded carrying case.
The rollup will be printed according to your file and assembled for a quick and easy presentation. The printed banner is fixed into a clamping rail at the top. On the back the banner dirsplay is held by a 3-part folding bar.
You can additionlly order a motif panel for the cartridge case.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and in our data sheet.
Set up in
Max. 1 minute
For size 85x200cm
WxHxD approx. 87x209x40m
Closed size approx. 87x9x9cm
The folding rod is not not height-adjustable.
60x200cm, 85x200cm, 85x220cm, 100x220cm, 100x220cm
Digital print CMYK, UV stable, latex, 720x720dpi (file resolution max. 150dpi)
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
Without B1:Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
Fabric polyester 325g/m², grey backside, BlockOut, scratch resistant, B1 (fire protection)
The appearance and workmanship of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may result. Please note that they won't be seen considering a viewing distance of 50cm.
An angular up to 3° to the front or back is in the technical range of tolerance. We recommend not to continue motifs for more than one banner.
Please always store and transport your RollUp "Single Premium" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up sometimes it will keep smooth.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
The cassette is made of anodized aluminum with silver sides. The rotable base foot in the middle is made of metal.
good to know
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file.