The retractable banner stand „Slim“ in shapely design and combined functionality attracts your advertising motif on events, exhibitions and presentations.
The retractable banner stand ?Slim? in shapely design and combined functionality attracts your advertising motif on events, exhibitions and presentations. Your motif is in focus by the flat front cassette and will be stored into the wave-shaped case. Screw feet can balance slightly uneven ground, if necessary. The two-parts pole has an additional telescopic bar to costumly adjust the print up to a minimum motif height of 155cm.
The 200cm high retractable banner stand is available in widths from 80cm to a square motif format of 200cm. Our banner display offer includes printing according to your data and a padded carry bag.
The set up is also possible for inexperienced users within a short time without tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
Max. 1 minute
WxHxD for size 85x200cm:
Latexprint CMYK, UV stable, 600dpi (file resolution max. 150dpi)
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
Print on rollup film:
Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
Print on textile:
Polyester 290 g/m², grey backside, opaque, BlockOut,
scratch resistant, B1 certified (fire safety class)
The appearance and workmanship of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may be the result. Please note that they won't be seen considering a viewing distance of 50cm.
Print on PVC:
PVC material 500g/m², UV-resistant, white backside, B1 certified
A 3° angle of inclination to the front or back is in the technical range of tolerance. We recommend not to create coherent motifs for more than one banner.
Please always store and transport your rollup "Classic Premium" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your rollup regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up sometimes it will keep smooth.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
The cassette is made of anodized aluminum with black aluminum caps on the sides and on the base feet.
Please create your print data without trim, bleed and crop marks.
For our print data sheet please see "Print data".
good to know
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and adjust them in your file.