The sticker "Budget" available with or without protective laminate. Suitable for short- and medium-term advertising.
Your sticker "Budget" will be produced custom-made to your wishes in the digital printing process CMYK. The self-adhesive film is suitable for short- and medium-term advertising in indoor and outdoor areas. It can be re-used for up to one year. A contour cut is possible on request (additional charge).
If you want to use the sticker for a sign board please add 5mm around the final size without crop marks. Please add a note during the ordering or send us this information to email@example.com.
For Indoor and Outdoor use for promotional activity and advertising at point of sale. Suitable for window decoration, application only on smooth, flat surfaces.
Your printed self-adhesive foil will cut to the ordered size. Die cut or kiss cut is possible on request. In case of an oversized order the foil will be divided according to our information sheet. The sticker will be produced with an 5mm overlap.
The maximum printing width for a rectangular motif and stickers with a cut contour is 1.45m. Up to these values the stickers are produced in one piece. All larger dimensions will be divided according to our data sheet.
digital print, CMYK latex (scratch resistant) 720x720dpi - (file resolution max. 150dpi)
Calendered PVC foil, detachable, glue on the backside colored in white. Protective laminate is available optional in mat or glossy.
The sticker is removable up to one year
Indoor: up to three years
Outdoor: depends on intensity of solar radiation and place of installation: in average two years, in maximum four years. In extreme cases, e.g. installation on a flat roof, one year.
Kiss cut / die cut
Contour cut is possible, please check cost (depending on quantity) in advance.
The minimum size per piece is 1m². If the order would be possible, please contact us in advance for smaller sizes.
The adhensive foil should be applied by experts. We recommend only a partial application up to max. 50% of the glass surface. When the sticker foil is applied completly on a glass pane you cause a risk of fracture! If you have any questions do not hesitate to call us.
Wipe the print surface with a soft cloth and water, please do not use detergents.
Double cut and sheet transition
Your oversized motif will be delivered devided with a 5mm overlap.
For seamless result, you may decide to double cut your foil mural.
1. Take one piece of your foil and place it.
2. Place the second piece and apply it seamless on the other.
3. Now you can make a single straight razor line in the middle of the 2 overlapping panels.
4. Peel away the excess paper carefully and gently smoot the cutted area and the underground.
If your motif needs to be divided, we will produce the sheet with 5mm overlap for a double cut.
If the color compatibility is a high priority, please order a proof. This allows you to counteract color variations and customize them in your file.