The retractable banner "Expo Double" is a double-sided, very sturdy and fine retractable banner stand system, which is available in different widths and a max. height of 220cm. The retractable banner stand can be printed with two different motifs or you can print one motif on both sides. Thus doubles your advertising space without extending the required space.
The banner display has a folding bar with an included telescopic part in the middle of the system to adjust the height down if needed. Both banners will be hooked to one rod to guarantee similiar height.
The double-sided retractable banner stand comes with a sturdy black padded carrying bag and includes printing according to your data. For safe storage the printed banners can be rolled into cartridge.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and in our data sheet.
Set up in
WxHxD for size 56x220cm:
The rod is a folding rod including a telescobic bar.
Two pieces each:
56x220cm, 83x220cm, 96x220cm, 116x220cm
Digital print CMYK, UV stable, 720dpi (file resolution max. 150dpi)
Fire Safety Class B1
B1 certified material is flame retardant and may be mandatory at trade shows, concerts or at certain venues. Please ask the event organizer in advance.
Without B1: Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
With B1: Polyester fabric 325g/m², grey backside, BlockOut (scratch resistant), B1 (fire retardancy classification)
The appearance and structure of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may result. Please note that they won't be seen considering a viewing distance of 50cm.
Please always store and transport your RollUp "Expo Double" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your printed banner display regularly, approximately every 3 months for a few hours. If the material is rolled for too long, it will curl backwards at the sides. If it is built up sometimes it will keep smooth.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
Anodized aluminum cassette with silver caps on the sides
good to know
To avoid damages of the print please pull the prints straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file, if necessary.