The Rectractable Banner "Blade" is characterized by a slim design. On uneven floors, adjusting screws on the underside of the cassette compensate unevenness and ensure a perfect and even display.
The banner will be printed with your custom motif and delivered assembled. The printed banner just needs to be fixed with the folding bar on the backside and is ready to use. Supplied with a padded carrying bag for a safe transport.
The set up is also possible for inexperienced users within a short time without further tools. The rollup is delivered ready assembled. A neutral instruction manual is included in the RollUp and can also be found in our data sheet.
Set up in
Approx. 1 minute
WxHxD for size 85x210cm app. 88x210x20cm
The rod is a 2-part folding rod with an height-adjustable telescopic bar included.
Closed size approx. 88x7x20cm
Digital print CMYK, UV stable, 720dpi (file resolution max. 150dpi)
Without B1:Roll-Up film, polypropylene / polyester composite 215µm , grey backside, front satined surface, scratch resistant
With B1: Polyester 290g/m² grey backside, BlockOut,
scratch resistant, B1 (fire protection)
The appearance and structure of textiles (such as polyester fabric) may vary due to the production process of the material. Sometimes small faults in the fabric (knots) may result. Please note that they won't be seen considering a viewing distance of 50cm.
Please always store and transport your RollUp "Blade" in the carrying bag and cardboard box to prevent bumps and scratches. Set up your RollUp regularly, approximately every 3 months for a few hours. If the material is rolled too long, it will curl backwards at the sides. If it is built up some time it will be smooth again.
Packaging and storage
Please avoid places with heat sources such as heaters or sunlight, because the glue could liquefy and loose the adhesive strenght.
The cassette is made of silver anodized aluminum with silver end caps.
Please create your print data without trim, bleed and crop marks. You will find all information in our data sheet.
good to know
To avoid damages of the print please pull the print straight out of the cartridge without rubbing the side caps. Also pay attention for disassembly.
The print surface can be cleaned detergent-free with a soft cloth and water.
If the color compatibility is of high priority, please order a proof. This allows you to counteract color variations and customize them in your file.