Sticker "bubble free" incl. print. Fast and dry application without air bubbles by air duct structure – also 24h express
Fast and dry application without air bubbles forming on the surface of the foil is now done easily with our bubble free sticker monomer. With the help of air ducts within the decal's material the air discharges when the material is being applied. This way large format decals can be attached to smooth and lightly curved surfaces easily. The bubble free sticker is suited for short term application and can be removed quickly.
Kiss cut is available on request (charge might be added).
Indoor and outdoor use. For short term activities, only on smooth, flat surfaces.
We will cut to the ordered size.
A contour cut is possible on request (additional charge).
Max. printing height: 1.1m (shortest side)
Max. printing width: 30m (longest side)
The maximum printing width for a rectangular motif and stickers with a cut contour is 1.1m. Up to these values the stickers are produced in one piece. All larger dimensions will be divided according to our data sheet.
Digital print, CMYK latex (scratch resistant), 600x600dpi, file resolution max. 150dpi
Calendered 100µ PVC foil, detachable, polyacrylate, gray colored, with air channel structured glue on the backside.
Optionally with matte or glossy protective 70µ laminate.
To create your printing motif or for special use please see our artwork guideline at tab print data.
Indoor: up to 3 years
Outdoor: depends on intensity of solar radiation and place of installation: in average two years, in maximum four years. In extreme cases, e.g. installation on a flat roof one year.
good to know
The minimum size per piece is 0.5m². Even if the selection is possible in the shop, please contact us in advance for smaller sizes.
Dry application only. Easy and quick processing by air channel structure.
We recommend to apply the adhesive foil by experts and a partial application up to max. 50% of the glass surface. When the sticker foil is applied completly on a glass pane you cause a risk of fracture! If you have any questions please feel free to contact us.
The decal surface can be cleaned detergent-free with a soft cloth and water.
For large, divided motifs with 5mm overlap for a double cut.
If you wish a division at a particular position, please create the data in seperate segments with 5mm overlap at the cutting position and additional 3mm bleed at all sides.
If we do not have any other information, the sticker will be divided by us in optimal separation automatic. It will be delivered in individual parts with standardly 5mm overlap.
Files with contour cut that exceeds the maximum width must already be divided by you and created with bleed and overlap.
If color accuracy is of high priority, we recommend a proof / preprint. The proof we will print on an 1:1 cutout in size DIN A3 on the original material. This allows you to counteract color variations and adjust them in your file if necessary.